Kennedale Electrical Work, From First Question to Final Cleanup
We handle panel upgrades, electrical repair, lighting, EV chargers, generators and whole-home rewiring for homeowners in Kennedale, Arlington and Mansfield. One person answers your call, plans the work, keeps you updated and checks the finished job with you, so you always know who to ask.
Towns We Serve Around Kennedale
Our electricians cover Kennedale and the communities around it, including Rendon, Forest Hill, Everman, Arlington, Mansfield, Crowley and Edgecliff Village. Jobs in Grand Prairie, Burleson and Haltom City are on our schedule as well.
- Kennedale
- Rendon
- Forest Hill
- Everman
- Arlington
- Mansfield
- Crowley
- Edgecliff Village
- Grand Prairie
- Burleson
- Haltom City
If your home sits just past these towns, mention your location on the phone and we will tell you plainly whether we can reach you.
Electrical Services for Your Home
Most of our days go to panel upgrades, electrical repair and lighting installation, along with EV charger installation and whole-home rewiring. We also install generators, handle generator service and repair, and set up home battery backup systems. For projects under way, we do remodel and addition wiring, code corrections and inspection fixes, and surge protection. Our torque and cleans are a maintenance visit for the panel itself: every lug and breaker screw brought back to its rated tightness, and the dust cleared out.
Panel Upgrades
New breaker panels and service upgrades sized from a real load calculation, permitted, inspected and coordinated by one person.
Electrical Repair
Breakers that trip, outlets that quit and lights that flicker, tested and traced to the fault, then repaired with matched parts and a tidy finish.
Lighting Installation
New recessed lights, pendants, fixtures and exterior lighting, placed with care, wired to code and finished cleanly.
EV Charger Installation
Level 2 charger and 240-volt outlet installs, sized to your panel, run neatly to your garage or driveway, and inspected where required.
Whole-Home Rewiring
New wiring throughout your home, run through small access openings, inspected as required, and coordinated by one person from the first walkthrough to final cleanup.
Generator Installation
Home standby generators sized to the circuits you rely on, wired through a transfer switch, permitted and started up with you watching.
Generator Service & Repair
Routine maintenance, load testing and repair for standby generators and transfer switches, with one person keeping you informed from the first call to the final test.
Home Battery Backup
Battery backup sized to the circuits you rely on, with the permit, wiring and switchover testing handled by one person on our side.
Remodel & Addition Wiring
Circuit planning, rough-in, inspections and trim-out for kitchens, baths, garage conversions and additions, coordinated by one contact on our side.
Code Corrections
We work through failed inspection notes and home sale report items, correct each one properly, and coordinate any reinspection.
Surge Protection
A surge protective device at your panel, a check of the grounding it relies on, and plain advice on which outlets still need their own protection.
Torque & Cleans
We open your panel, bring every lug and breaker screw back to the maker's torque spec, clear out dust and debris, and show you anything that looks heat-stressed.
What Shapes the Cost of Your Project
Electrical pricing depends on what is behind your walls as much as what you can see. We look at the job in person before giving you a number, and we walk you through each line so nothing comes as a surprise later.
After we see the job, you get an itemized estimate that lists labor, materials and permit steps. Nothing changes without a conversation with you first.
- Scope and size
- A single circuit or fixture is a short visit. A panel upgrade, rewiring or generator installation involves more material, more labor and sometimes more than one day.
- Access to the wiring
- Open attic space and an unfinished garage make runs quicker. Finished ceilings, tight crawl spaces and long distances from the panel add time.
- Condition of existing wiring
- Older or previously modified wiring sometimes has to be brought up to standard before anything new ties into it. If we find that, you see photos and hear the reason before it goes on the estimate.
- Equipment and materials
- Panel brand, charger model, fixture choice and generator size all move the price. We can explain the tradeoffs between options so you choose with the full picture.
- Permits and inspections
- Many jobs need a permit and an inspection from the local jurisdiction. Those steps carry fees and scheduling time, and we include them in the plan from the start.
- Utility coordination
- Panel upgrades and some generator or battery work may need the utility to disconnect and reconnect service. That timing affects how the job day is scheduled.
About Kennedale Electrician
We are a small electrical company serving homeowners in Kennedale and the surrounding area. The idea behind how we run things is simple: one person should know your job from the first phone call to the last swept floor. That person answers questions, coordinates the electricians and keeps you informed when plans need to change.
We care about the parts of the job you see every day, like a level fixture and a neatly labeled panel, and the parts you never see, like a properly torqued lug or a correctly sized breaker. Both matter, and we treat them with the same attention.
- In business
- 5 years in business
- Insurance
- Licensed and insured electricians
- Certifications
- NABCEP certified
How a Job Runs, Start to Finish
Every project follows the same steps, and the same person guides you through each one.
- 1
Your call
Tell us what is happening or what you want added. We ask a few questions about your home and the problem, then book a service visit at a time that suits you.
- 2
The service visit
An electrician tests the circuits, looks at the panel and checks the area where work will happen. You get a clear explanation of what we found and photos if something needs attention.
- 3
Estimate and scheduling
You receive an itemized estimate. Once you approve it, we pull any required permit, order materials and set a work date, including utility coordination if it is needed.
- 4
The work and the walkthrough
We protect your floors, complete the work and test every circuit we touched. Then we walk you through the finished job, arrange the inspection if required and clean up before leaving.
Questions Homeowners Ask Us
Do you pull permits for the work?
Yes. Any job that needs a permit gets one before the work starts, and we book the inspection with whichever local jurisdiction covers your address. Those steps appear on your estimate, and your contact lets you know when the inspector is due.
How long does a panel upgrade take?
Most panel changes are completed in a single working day once the permit and utility timing are lined up. Power to your home is off for part of that day. Larger upgrades or homes needing extra corrections can take longer, and we tell you that before we start.
Can you install an EV charger in my garage?
In most homes, yes. We check your panel capacity, the distance from the panel to the parking spot and the charger you have chosen. If your panel needs more room, we explain the options, including whether a panel upgrade makes sense.
Why do my breakers keep tripping?
A breaker trips to protect the circuit from too much current. Common causes are too many appliances on one circuit, a failing device, a loose connection or a worn breaker. Summer air conditioning loads can push borderline circuits over the edge. We test the circuit to find which one it is before recommending a fix.
Is there a warranty on your work?
Our workmanship carries a 1-year warranty. If something we installed or repaired does not perform as it should because of how we did the work, reach out to the same person who handled your job and we will set up a visit to look at it.
How disruptive is a larger job like rewiring?
We plan bigger jobs room by room and restore power to finished areas at the end of each day wherever it is safe to do so. Floors stay covered, tools stay in one spot, and we tidy up before leaving each evening. Your contact tells you ahead of time which rooms and circuits will be affected and when.
Should I choose a generator or a battery backup system?
It depends on what you want to keep running and for how long. A standby generator can run larger loads through long outages, while a home battery backup system is quiet and suits essential circuits. We talk through your priorities and your home's setup, then explain which fits.
What is a torque and clean?
It is a maintenance visit for your panel. We check and tighten connections to their rated torque, clean dust and debris, and look for signs of heat or wear. Loose connections are a common source of trouble, and this catches them early.
How We Work in Your Home
Good electrical work is mostly careful decisions made before anything gets opened up. Here is what that looks like when we take on your job.
The person you call stays with the job
The same person who takes your first call sets the scope, books the electricians, answers your questions mid-job and walks the finished work with you. You never have to repeat your story to someone new.
We find the cause before we quote
A tripping breaker can be a worn breaker, an overloaded circuit or a loose connection at a device. We test first, so the fix you pay for is aimed at the actual fault.
Materials chosen to last
We use components rated for the load and the location, from properly sized wire to outdoor-rated boxes and fittings. Connections are torqued to spec, not guessed at.
Finish work that respects your home
We cover floors where we walk, cut drywall neatly and keep openings as small as the work allows. Cover plates sit straight, fixtures hang level, and debris leaves with us.
Plain answers on repair or replace
If an existing part can be safely repaired, we say so. When a part is worn out, we point to the evidence, often with a photo of the scorched terminal or cracked housing, and tell you what a replacement involves before you decide.
Talk to the Person Who Will Handle Your Job
Tell us what you need, and we will set up a service visit to look at it in person. From there, one person keeps everything moving until the work is done and the room is clean.