ServicesLighting Installation
Lighting Installation in Kennedale
We install recessed lights, pendants, chandeliers, under-cabinet strips and exterior lighting with close attention to placement, wiring and finish. One person plans the layout with you, schedules the work and walks you through the result, so you always know who to ask.
Light Placed Where You Actually Need It
Good lighting starts with how you use a room. We look at where you cook, read and walk at night, then suggest fixture types, spacing and switching that fit. A kitchen might need under-cabinet light at the counter and fewer cans overhead. A living room might need dimmable layers instead of one bright center fixture.
The person who quotes your lighting job is the same person you talk to through scheduling, installation and the final walkthrough. If you change your mind about a pendant height or a dimmer location, you tell one person and it gets handled.
Behind the finish is the part you won't see: correctly rated boxes, connections made to code, and circuits checked so new fixtures don't overload what is already there. If a room needs more capacity than its circuit can give, we'll say so plainly and explain the options.
What Our Lighting Installation Covers
- Recessed cans and slim LED wafers
- We space each can based on ceiling height and how the room is used, so light falls evenly across floors and counters instead of pooling in bright circles. Where joists or ductwork leave little room above, thin LED wafer fixtures fit without a bulky housing.
- Pendants, chandeliers and fans
- Heavier fixtures go on boxes rated for their weight. We set hang heights with you before anything is cut to length, so the result looks right over your island or table.
- Under-cabinet and accent lighting
- Low-profile strips and puck lights are wired so the drivers stay hidden and the switching makes sense from where you stand.
- Dimmers and switching
- We match dimmers to the LED fixtures you choose, which avoids the flicker and buzz that come from mismatched parts. Three-way switching can be added at stairs and long hallways.
- Exterior and landscape lighting
- Porch lights, soffit cans, security lights and path lighting are installed with weather-rated fixtures and connections suited to outdoor use.
Signs It's Time for New Lighting
Rooms that feel dim at night
One ceiling fixture rarely lights a whole room. Shadows on counters or desks usually mean the layout needs another layer.
Flickering or buzzing LEDs
This often comes from an older dimmer paired with newer bulbs. Sometimes it points to a loose connection, which we check first.
Fixtures that run hot or discolor
Browned glass, brittle sockets or a warm switch plate are worth a look. These can signal overlamping or a worn fixture that should be replaced.
A dark yard, porch or driveway
If you step out at night into darkness, exterior lighting on a switch, timer or motion sensor makes the walk safer.
A remodel that changed the room
New cabinets, a moved island or an opened wall often leave old fixtures in the wrong place. For bigger changes, our remodel and addition wiring service covers the full scope.
What Shapes the Cost of Lighting Work
Lighting prices depend more on the path the wire takes than on the fixture itself. We give you a written estimate after seeing the space, and we explain each line so nothing is a surprise later.
Number and type of fixtures
Six recessed lights in one ceiling cost less per fixture than three scattered pendants in different rooms. Heavy chandeliers may need added bracing.
Access above the ceiling
An open attic makes wiring straightforward. A second-story ceiling with finished rooms above, or a vaulted ceiling, takes more time and care.
Circuit capacity
If the existing circuit can carry the new load, the job stays simple. If not, a new circuit or panel work may be part of the plan.
Switching and controls
Adding dimmers, new switch locations or three-way control adds parts and labor, though it often makes the biggest difference in how a room feels.
How a Lighting Job Runs
- 1
Talk it through by phone
You tell us what rooms you're thinking about and what bothers you about the light now. We set a service visit at a time that suits you.
- 2
Walkthrough and written plan
At your home, we mark proposed fixture locations, check the existing circuits and attic access, and explain what's involved. You get the scope and price in writing before work is scheduled.
- 3
Installation day
We cover floors and furniture beneath the work area and keep openings in the ceiling tight to the fixture. Attic work is planned for the cooler part of the day in summer when possible, which keeps the pace careful rather than rushed.
- 4
Testing and walkthrough
Every fixture, dimmer and switch is tested with you in the room. We clear away packaging and dust, and the same person you've spoken with all along answers any last questions.
Lighting Installation Questions
Can I supply my own fixtures?
Yes. We're glad to install fixtures you've chosen. We'll ask for the model ahead of time so we can confirm the box, mounting and dimmer compatibility. If a fixture arrives damaged or missing parts, we'll tell you before installing it.
Will you need to cut into my ceiling?
Recessed lights need a cut for each fixture, sized to the housing so the trim covers the edge cleanly. Where an attic is accessible, we route wire from above to avoid extra openings. If patching is needed anywhere, we'll explain it during the walkthrough.
Do lighting jobs require a permit?
Some do, mostly when the work adds a new circuit or runs fresh wire through walls and ceilings. The rules come from the city or county you live in, so we check what your project calls for, pull the permit when one is needed and set up the inspection. You'll hear whether your job needs one at the walkthrough, before anything is scheduled.
My new LEDs flicker when I dim them. What's wrong?
In most cases the switch is the cause. Dimmers installed years ago were designed for heavier incandescent loads, and they struggle to regulate the small wattage an LED draws. Swapping in a dimmer rated for LED use generally settles it. If the flicker persists after that, we look at the connections and wiring, which falls under our electrical repair service.
Can you add lighting outside without trenching my whole yard?
Often, yes. Soffit and porch lighting can usually be fed from inside the house or attic. Path and landscape lighting may need a shallow run, and we'll show you the route before any digging.
Ready to See Your Rooms in Better Light
Tell us which rooms you have in mind and we'll set up a visit to plan fixtures, switching and placement with you. One person stays with your lighting job until the last fixture is tested.