Skip to content

Licensed, insured, 5 years in business. Book a visit: (682) 357-4925

(682) 357-4925

Electrician services in Kennedale, TX

Panel upgrades, electrical repair, lighting installation, EV charger installation, Whole-Home rewiring, generator installation, generator service & repair, home battery backup, remodel & addition wiring, code corrections, surge protection and torque & cleans for homes in Kennedale and the towns around it.

Electrician in gloves holding a clamp meter points at worn breakers in an old rusty open panel beside the meter on a home's exterior wall as the homeowner watches
  • Electrician in gloves and a cap working inside an open gray breaker panel beside an electric meter on a stucco house wall, with the panel cover and a box of wire nearby

    Panel Upgrades

    New breaker panels and service upgrades sized from a real load calculation, permitted, inspected and coordinated by one person.

  • Over-the-shoulder view of a gloved electrician testing a white wall outlet in an open electrical box with a yellow digital multimeter

    Electrical Repair

    Breakers that trip, outlets that quit and lights that flicker, tested and traced to the fault, then repaired with matched parts and a tidy finish.

  • Electrician on a stepladder connecting wires at a ceiling box beside lit brass pendant lights over a kitchen island with white cabinets

    Lighting Installation

    New recessed lights, pendants, fixtures and exterior lighting, placed with care, wired to code and finished cleanly.

  • Electrician in gloves working at a panel on a tan brick wall beside an open garage, with conduit running to a newly mounted EV charger and coiled cable

    EV Charger Installation

    Level 2 charger and 240-volt outlet installs, sized to your panel, run neatly to your garage or driveway, and inspected where required.

  • Gloved electrician's hands pulling yellow, orange and white cable through a bored wood stud beside blue outlet boxes, with an open breaker panel in the framed wall behind

    Whole-Home Rewiring

    New wiring throughout your home, run through small access openings, inspected as required, and coordinated by one person from the first walkthrough to final cleanup.

  • Electrician in gloves wiring an open panel beside the meter on a brick wall, with a standby generator on a concrete pad in the side yard and tools nearby

    Generator Installation

    Home standby generators sized to the circuits you rely on, wired through a transfer switch, permitted and started up with you watching.

  • Electrician kneeling beside an open breaker panel, testing an exposed wall outlet with a multimeter, tool bags on the concrete floor nearby

    Generator Service & Repair

    Routine maintenance, load testing and repair for standby generators and transfer switches, with one person keeping you informed from the first call to the final test.

  • Electrician in gloves working at an open breaker panel in a framed garage wall, with yellow, orange and white cables run through studs and ceiling joists

    Home Battery Backup

    Battery backup sized to the circuits you rely on, with the permit, wiring and switchover testing handled by one person on our side.

  • Electrician in gloves testing wires with a clamp meter at an open breaker panel beside the meter on a brick house wall, coils of cable staged nearby

    Remodel & Addition Wiring

    Circuit planning, rough-in, inspections and trim-out for kitchens, baths, garage conversions and additions, coordinated by one contact on our side.

  • Two electricians in a home garage, one on a step ladder running white cable through open wall studs beside an open breaker panel, a white van in the driveway

    Code Corrections

    We work through failed inspection notes and home sale report items, correct each one properly, and coordinate any reinspection.

  • Electrician in a cap and gloves working inside an open breaker panel on a garage wall, beside a gray metal enclosure with conduit and a green ground wire

    Surge Protection

    A surge protective device at your panel, a check of the grounding it relies on, and plain advice on which outlets still need their own protection.

  • Electrician in a beanie and gloves tightening breaker connections in an open panel beside the meter on a brick house wall, with an aluminum ladder nearby

    Torque & Cleans

    We open your panel, bring every lug and breaker screw back to the maker's torque spec, clear out dust and debris, and show you anything that looks heat-stressed.

Gray meter and main breaker combo panel on a tan brick house wall, with a metal service mast and weatherhead above and conduit running down to the ground

Talk to the Person Who Will Handle Your Job

Tell us what you need, and we will set up a service visit to look at it in person. From there, one person keeps everything moving until the work is done and the room is clean.